The diary’s full, the ramps are occupied and everyone’s still at work at five. Then you add up the labour on the invoices and wonder where Thursday went. A busy workshop can lose hours a few minutes at a time. Ten minutes looking for a part, twenty waiting for approval and half an hour repeating a test can all disappear into the same job card.

Five numbers give you a place to look. Track hours available, hours worked on vehicles, hours billed, hours delayed and hours spent on comebacks. A short review each Friday can tell you whether to change the diary, stock a common part or rewrite the way you quote a particular job.
There’s useful industry context. In January 2025, Aftermarket reported that the Garage Industry Trends panel had received just over a million transactions from more than 175 participating workshops. Its reported average labour rate rose from £74.04 in January 2024 to £75.87 in December 2024. The platform uses figures from workshops that choose to share their data. Its rate gives you a dated market comparison, and more recent figures may differ. Your time records show how much of your own week you can turn into revenue at your rate.
Sources: Aftermarket coverage of the Garage Industry Trends dataset · Garage Industry Trends methodology
Start with the technician hours you can actually plan to sell. Take out booked leave, scheduled meetings, training and breaks if they were included in the rota hours. Keep the same rules from week to week. Ordinary gaps, parts delays and callbacks belong in your review, so leave those hours in the available total.
Two technicians on 40-hour schedules give you 80 hours between them. Take out four hours of planned training and you have 76 available hours in this example. If you work on the ramps and run reception, count the hours you can realistically protect for vehicle work. Your diary might show you free all morning. Your phone may have other ideas.
Check bays separately. Two ramps can be available while a technician is out training. The reverse happens when both technicians are ready and a vehicle is occupying a ramp overnight. Label the constraint so you can decide where the next job can go. Comparing booked and unbooked hours by bay can help you spot this.
Read more: Garage Invoice Daily Capacity Report

Use a start and stop time against each job or task. Include the time the technician actually spends diagnosing, repairing and checking the vehicle. Include comeback work here and give it its own tag, so you can also find it under number five.
Agree what to do when a job stops. If the technician moves to another vehicle while waiting for a part, stop the first job timer and start the second. If two technicians work together for 30 minutes, that’s one technician-hour. The bay was occupied for 30 minutes. Those two measurements answer different questions.
A simple way to see how much of your available time was spent on vehicles is to divide worked hours by available hours. Say our example team logs 51 hours on vehicles. That’s 67% of its 76 available hours, rounded. Check a whole month before treating one Friday as a trend. A week with training, a bank holiday or a large intermittent fault will look different from the one before it.
Add up the labour hours actually charged, including the hours allowed in fixed-price work where you have a clear labour allowance. Use the allowance you priced at the start. That lets you see whether it was realistic. Where a package has no documented labour allowance, flag it and start recording the allowance on new jobs so you can track them consistently.
In our example the garage billed 46 hours. That’s 61% of available hours, or about 90 billed hours for every 100 hours worked. Two figures help because they point to different questions. If available time stays steady and worked hours are low, check bookings and delays. If worked hours are high and billed hours lag, look at quote allowances, unpaid extras or comeback time.
Be careful with jobs that cross the weekend. A clutch job started Thursday and invoiced Monday may put clocked hours in one weekly report and sales in the next. For quote accuracy, compare the worked and billed hours on the same completed jobs. For planning the diary, use the hours and delays recorded during that week. Add a note about large jobs in progress before drawing conclusions from a short period.
Turn your billed hours into a price with the free labour rate calculator, or read how much should a garage charge per hour?
Count technician time lost where the person was ready to work, was blocked and couldn’t move to another job. Give the time a short reason such as waiting for a part, waiting for approval, vehicle late, or bay blocked. Separately, note how long a bay stayed occupied if a vehicle was stuck on it. Two hours of bay blockage might cost zero technician-hours if everyone can continue in another bay.
Try this for a week with one technician and two small jobs on a morning. If the first car is waiting for pads and the technician switches straight to the second, record the effect on the bay diary. If they can’t start the second until the first car moves and lose 30 minutes, that’s 30 minutes of technician delay too.
Our example workshop logged nine blocked technician-hours, including four hours waiting for parts, three for approval and two for bay access. That points to a practical experiment. Confirm parts availability the afternoon before booked jobs for two weeks. Ask the team if there’s a better queue of jobs to switch to while the part is on the way. Measure the next fortnight before deciding whether it worked.

Give repeat visits a link to the original job. Record the concern, the time spent checking it and the outcome. A repeat symptom might turn out to be an unrelated fault, a failed replacement part or a genuine problem with the original work. Capture the facts first. You can then agree how to categorise it and who covers the cost. If you use a separate job card for the return visit, enter the original reference so both jobs stay traceable.
Read more: Garage Invoice Job Cards Report
Our workshop spent three hours on confirmed comeback work. Those hours are already included in the 51 worked on vehicles. They help explain some of the gap between worked and billed time. Keep an eye on comeback parts as well, including whether a supplier eventually credited them. It’s easy for a ten-minute road test to disappear when there’s no new invoice.
Look for repeat patterns by job type, part or process. If several brake jobs return with the same concern, review what’s documented on the original job, the part supplied and the final checks. Give the team a clear way to record what they found. One awkward Friday is a poor reason to judge a technician.
Here’s the complete example. The numbers are illustrative so you can swap in those from your own workshop.
| Measure | Example week | What to ask |
|---|---|---|
| Available | 76 hours | Was the staffing or bay plan realistic? |
| Worked on vehicles | 51 hours | How much technician time went into actual jobs? |
| Billed | 46 hours | Are quotes recovering the time work takes? |
| Delayed | 9 hours | What blocked work most often this week? |
| Comebacks | 3 hours | What kind of problem brought work back? |
In this example, 76 available hours breaks down into 51 worked hours, nine delayed hours and 16 other hours. The 16 could include handovers, quotes, tidying and gaps without booked work. Billed hours are a separate sales measure, and the three comeback hours sit inside worked hours. That’s how you keep the sheet from making a busy week look even longer than it felt.
If this workshop averaged £82 per billed hour before VAT, its 46 hours would bring in £3,772 in labour sales. If those invoices cover the same jobs as the 51 logged hours, that’s about £74 of revenue per hour spent working on them. Think of that figure when the rate on the wall feels healthy but the week’s sales feel low. Turning three blocked hours into three billed ones at £82 would add £246 in labour sales if there’s work to fill the time.
At the end of Friday, pick the one problem you can change next week. Write down who’ll try the change and which figure should move. If it works, try it again. If it doesn’t, you’ll have a better question to take back to the diary. A simple weekly sheet is enough to start. If you use Garage Invoice, pull scheduled hours from the Daily Capacity Report and look at the timesheets, job cards and sales records alongside it.
Read more: Garage Invoice reports overview